LAB LOGO
Phone: 1-800-243-8242           Home Catalog Home Contact Us Where to Buy

new KIT TRADE IN PROGRAM Locate a Distributor near you.

LAB Re-Pinning Tools

LREPIN - LAB Repinner Kit

Photo of bulk repin kit
Click to enlarge image

  • The LAB Repinner Kit was designed with the repinner in mind. Its unique insert has pocket depths unlike a normal pinning kit. The locksmith can customize their own repinning kit to accommodate their specific needs (ie. pins, clips, springs, cores, tools.)
  • Smart Wedge Design
  • Uniquely designed insert
  • Sold Empty
  • Side drawer for tools
  • Can accommodate approximately 2000 of the largest Schlage pin in the big pockets and upwards of 5000 of the smallest pin.
  • Leakproof Seal-Tight Cover
  • Wedge Shape with 10° angle
  • Dimensions:13" x 10-1/2" x 3-1/4"

LPDMED - LAB Brand Pin Decoder for Medeco Biaxial Pins 


Click to enlarge image

  • Identify and Sort, Medeco Biaxial bottom pins according to Length, Angle & Skew.
  • Measure/identify master and driver pin lengths.
  • Identify fore and aft key cut positions.
  • Determine key cut depths.

LZT001 - Formed End Tweezers


close up photo of tweezer
Click to enlarge image

  • Curved Ends For Positive Grip
  • Perfect Size & Weight
  • Made of Stainless Steel

LABMAT - Workbench Pinning Mat


Click to enlarge image

  • Use on workbenches or adhered and used in mobile vans.
  • Will capture and retain several hundred pins and prevent them from being spilled onto the floor.
  • Pin Block for keying cylinders has been molded into the lower left. This feature will help organize keying and prevent mixing of pins and parts.
  • Dimensions are 15-3/4" x 9-7/8" x 1/4".

LCR005 - Cylinder Cap Removal Tool

How It Works

Click to enlarge image

  • Time saving tool to remove the cylinder caps from Schlage, Weiser, Arrow, and Falcon Cylinders. 

cap remover toolcap remover toolcap remover tool

 

LLT001 - LAB Lube Lock Lubricant


Click to enlarge image

LPB001 - Wood Block Pinning Tray


Click to enlarge image

  • Made of Maple
  • Holds 5 Plugs
  • Great for Repinning Multiple Cylinders, Master and
    Grand Master Pinning
  • Measures 4"x4-1/2"

LPB002 - Mini DUR-X Pin Block

photo of min dur-x pin block
Click to enlarge image

  • Made of Super-Tough Polyethylene
  • Holds 4 Plugs
  • Great for Repinning Multiple Cylinders, Master and Grand Master Pinning
  • Dimensions: 8"x5"x1-3/4"

CRT001 - Cylinder Removal Tool for Kwikset Cylinders


Click to enlarge image

  • Use on standard 400 Series cylinder assemblies
  • Made from .080" thick cold rolled steel.
  • Yellow Dichromate coated to resist corrosion

Plug Followers


  • LFT000 Schlage (For 3 types of cylinders)
  • LFT001 Universal (.498)
  • LFT002 Weslock (.500) Dia.
  • LFT003 Corbin (.550) Dia.
  • LFT004 Small Plug (.398) Dia.
  • LFT008 Kwikset
  • LFT005 Set of Five Followers LFT000,1,2,3 & 4
  • Light weight
  • Very Durable
  • White Delrin*
  • Reflects Light for pinning

LKG001 - 5-N-1 Key Gauge


Click to enlarge image

  • For Kwikset, Schlage, Weiser, Weslock, and Master
  • Small size (3-3/8" x 2-1/8")

LKGKS - 2-N-1 Key Gauge


Click to enlarge image

  • For Kwikset & Schlage
  • Small size

LKGIC - Interchangeable Core Key Gauge


Click to enlarge image

  • For A2, A3 and A4 systems
  • Small size (3-3/4" x 2")
  • Stainless steel

LICCB - The LAB Interchangeable Core Annex®


Click to enlarge image

  • The LAB Interchangeable Core Annex® offers the simplest method for the loading and unloading of Interchangeable Core Pins, Springs and caps, using only one instrument for both functions. 
  • A second time saving feature is a Slide out Code Book below the area where the core is slid in place. This allows the user to unload the core pins, springs, and caps into a confined area without spilling the parts in or around the work area. 
  • The Slide out Code Book is also used to decode the Core to determine the bitting of the control key when it is not available and also determine the top master key bitting.
  • Constructed of Stainless Steel

LSC001 - EASY WAY I.Core Pinning Slide Chart for A2 System


Click to enlarge image

  • This slide chart can be used to determine pinning for both Master Keyed and Non-Master Keyed A2 System Interchangeable Core Cylinders. The chart displays pin stacks for one pin chamber at a time.

 

 


Locate a Distributor near you.

"Ace, Arrow, Best, Baldwin, CCL, Corbin Russwin, Dexter, Dorma, Falcon, Kwikset, Master, Medeco Keymark, Medeco Biaxial, National, Sargent, Schlage, Weiser, Weslock, Yale and other tradenames and trademarks used in this website are owned by the respective manufacturers of such products."
*Delrin is a product of Dupont Industries.
MADE IN THE U.S.A.

©1999-2011  LAB Security Systems Corporation